Circuit Breaker & AutomaticTransfer Switch - Surge Protective Device - Products - WENZHOU CHENLU IMP&EXP CO.LTD

Search

Product List

Products List

UK series

The terminal is...

AN3-125

3 phase Registe...

VDP-VSC6

The video doorb...

Products

You are here: Home > Products > Circuit Breaker & AutomaticTransfer Switch

ANQ3-G Self-resettable Overvoltage and Undervoltage Protection Device is developed under the electricity situation. Control circuit components was imported , This products are of modulization standards, excellent performance and reliability. Can work under abnormal voltage conditions. When the utility voltage exceeds the protector operating voltage, the protector can quickly and reliably cut off the power to protect the electrical safety. When the mains voltage back to normal, the protector can automatically turn on the power to restore power supply, all the functions of all automatic implementation, without staff operation. LED light switch on the panel can indicate the working conditions of protection. Green means normal, red means abnormal. When in red, the light protection function starts to cut off the power supply. This series of products is compact, beautiful appearance, installation rail is same with DZ47 (45) .

ANQ3-G

Short-circuit protection which SPD products needed was integrated in the SPD module, no fuse neeed, It adopts 35mm standard rail， Compared with the conventional fuse + SPD module, it has the following advantages: Residual voltage decreased by 50% or more.In the case of separate installation of fuses, in the fuse itself and the connection wires are inductor, so there must be a great residual pressure. The use of ANT1-R products, this part of the residual pressure is almost zero, it can be more effective protection equipment.

ANT1-R

ANT1-(C)8 series solar surge protective device is suitable for the new energy solar power generation system, it’s working voltage covers 500V,800V and 1000V .It is installed in the main power system at DC circuit ,to protect against the indirect lightning current ,direct lighting current or other instantaneous over voltage.

ANT1-C8

ANT5 series surge protective (in short :SPD,alias:surge protector,surge arrecter) is suitable for TN-S,TN-C-S,TT,IT,ect. Power supply system of AC 50/60 HZ, =380V,installed on joint of LAPZOA zone or LAPZOB and LAPZ1 zone ,which protects the electric network not shocked by the thunder and lightning, it’s designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, here is a failure release mounted on the module of suge protective device, When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device separate from the power system and give the indication signal, green means normal ,red means abnormal.

ANT1-5

ANT4 series surge protective device (in short.SPD.alias. surge protector,surge arrecter) is suitable for TT,TN-C,TN-S,IT ect.Power supply system of AC 50/60HZ. ≤380V,Which protects the elective device not shocked by the thunder or surge over-voltage.

ANT4

ANT1-1~3 series surge protective (in short :SPD,alias:surge protector,surge arrecter) is suitable for TN-S,TN-C-S,TT,IT,ect. Power supply system of AC 50/60 HZ, =380V,installed on joint of LAPZOA zone or LAPZOB and LAPZ1 zone ,which protects the electric network not shocked by the thunder and lightning, it’s designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, here is a failure release mounted on the module of suge protective device, When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device separate from the power system and give the indication signal, green means abnormal ,It’s also could be replaced for the module when has operating voltage.

ANT1-1~3

ANT1-B series surge protective (in short :SPD,alias:surge protector,surge arrecter) is suitable for TN-S,TN-C-S,TT,IT,ect. Power supply system of AC 50/60 HZ, =380V,installed on joint of LAPZOA zone or LAPZOB and LAPZ1 zone ,which protects the electric network not shocked by the thunder and lightning, it’s designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, here is a failure release mounted on the module of suge protective device, When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device separate from the power system and give the indication signal, green means abnormal ,It’s also could be replaced for the module when has operating voltage.

ANT1-B

ANT1-C series surge protective (in short :SPD,alias:surge protector,surge arrecter) is suitable for TN-S,TN-C-S,TT,IT,ect. Power supply system of AC 50/60 HZ, =380V,installed on joint of LAPZO or LAPO1 , LPZ2 zone ,which protects the electric network not shocked by the thunder and lightning, it’s designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, here is a failure release mounted on the module of suge protective device, When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device separate from the power system and give the indication signal, green means abnormal ,It’s also could be replaced for the module when has operating voltage.

ANT1-C ARC

ANT1-C series surge protective (in short :SPD,alias:surge protector,surge arrecter) is suitable for TN-S,TN-C-S,TT,IT,ect. Power supply system of AC 50/60 HZ, ≤380V,installed on joint of LAP1 or LPZ2 and LPZ3.it’s designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, here is a failure release mounted on the module of suge protective device, When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device separate from the power system and give the indication signal, green means abnormal ,It’s also could be replaced for the module when has operating voltage.

ANT1-C

ANT1-D series surge protective device(in short; SPD, alias; surge protector,surge arrecter)is suitable for TN-S,TN-C-S,TT,I Tect.Power supply system of AC 50/60 HZ,=380V,installed on joint of LAP1 or LPZ2 and LPZ3,it’s design according to IEC61643-1,GB18802.1 , it’s adopts 35mm standard rail,there is a failure release mounted on the module of suge protective device. When the SPD fails in breakerdown for over-heat and over-current,the failure erelease will help electric device separate from the power system and give the indication signal, green means abnormal, it’s also could be replaced for the module when has operating voltage.

ANT1-D

ANT1-A50 series of graphite gap type surge protective device(a Lightning arrester, 10/35 μs waveform) 3 according to IEC and GB standards. Equipment system used in high risk area of the power supply of the first primary surge protection. Can prevent lightning strike, all kinds of surge current, pass A combination of different number of suitable to single-phase. Three-phase power supply line. dieModular design, standard 35mm rail mounted, installed in the building The total power distribution cabinet(box),outdoor distribution cabinet(box),with lightning current high. The discharge capacity,free wheeling,single module maximum impulse current (10/35 μS)Sbranc Don’t reach limp=15KA,limp=25KA,limp=35KA ,limp=50KA maxim umdischarge current (8/20 μS) Can reach Imax=100KA,Imax=150KA,Imax=160KA,Imax=200KA.

ANTI-A50

Circuit Breaker & AutomaticTransfer Switch

Contactor & Industrial electrical appliances

2015 © Copyright WENZHOU CHENLU IMP.&EXP. CO.,LTD TEL: +86 13757778680 FAX: Design By:Otree.cn

Sitemap Google+ Product Summary DC circuit breaker PRIVACY POLICY